Description :

The name EFM 6 comes from the max. thicknes chapacity that tha machine cam processs. This machine used to cut and flange edges of dishes which are used as cap for metal storage tanks, fuel tanks, boilers etc. The machine has a 7.5Kw electrical motor which its power transfered to 2 different pumps. One of the pump give the motion to the flanging/cutting rolls when second pump gives movements to the pistons up and down.

There are 2 saparate reducers on 2 heads of the machine, torque motor adjusted on each of them. At cutting side reducer driven with a means of chain when gear system used for the flanging head. Working principles: there is a metal templete mold below the processed dishes that the machine read it to copy the same as reqired dishes. The machine is copying the templete and create the same diameter/shape aimed buy cutting first than maket he edge falanging.

You can handle just adjustments of cutting and flanging process from related buttons mounted on the side of the machine. After thesee manuel adjustments, cutting and flanging processes made automatically by the machine. A small U section part must be welded on the center of dishes, than dishes mounted to the movable piston to be ready to be cut and flanged. As an optional: You can have pneumatic vacuum system to keep the dishes ready to be cut / flanged.